MagnesiumAlloy相关论文
The linear shaped charge cutting technology is an effective technology for aircraft separation. It can separate invalid ......
Using Gleeble-3500 thermal simulator, the high temperature plastic deformation behavior and microstructure evolution of ......
Owing to the nonuniform wall thickness and complex internal structure,the measurement of the residual stress on magnesiu......
通过电化学测试、扫描振动电极技术、浸泡实验和析氢实验分析AZ80合金、磷酸钙转化涂层以及含划痕涂层的耐腐蚀性能,进而研究划痕......
研究AZ31合金在非对称挤压腔循环膨胀挤出(CEE-AEC)过程中的显微组织、织构演化和力学性能.结果表明,在CEE-AEC过程中发生连续动态......
One-pot scalable in situ growth of highly corrosion-resistant MgAl-LDH/MBT composite coating on magn
Current corrosion-resistant layered double hydroxide(LDH)coating on Mg alloy is usually in situ grown in autoclave by hy......
8-hydroxyquinoline (8-HQ) intercalated layered double hydroxides (LDH) film as underlayer and sol–gel layer was combine......
Corrosion Resistance of Superhydrophobic Mg(OH)2/Calcium Myristate Composite Coating on Magnesium Al
Hydrophobic Mg(OH)2/calcium myristate (Ca[CH3(CH2)12COO]2,CaMS) and Mg(OH)2/magnesium myristate(Mg[CH3(CH2)12COO]2,MgMS)......
Two distinct roles of Al2Sm and Al11Sm3 phases on the corrosion behavior of the magnesium alloy Mg-5
The roles of Al11Sm3 and Al2Sm phases on microstructure evolution,mechanical properties and corrosion behavior of the Mg......
Microstructure evolution and mechanical properties of Mg–9Al–1Si–1SiC composites processed by multi-
In this study, Mg–9Al–1Si–1SiC (wt%) composites were processed by multi-pass equal-channel angular pressing (ECAP) at......
Microstructure evolution and mechanical properties of Mg–9Al–1Si–1SiC composites processed by multi-
In this study, Mg–9Al–1Si–1SiC (wt％) composites were processed by multi-pass equal-channel angular pressing (ECAP) at ......
Phase-field modeling of dendritic growth of magnesium alloys with a parallel-adaptive mesh refinemen
A two-dimensional phase field (PF) model was developed to simulate the dendritic solidification in magnesium alloy with ......
Dealloying corrosion of anodic and nanometric Mg41Nd5 in solid solution-treated Mg-3Nd-1Li-0.2Zn all
The microstructure and chemical compositions of the solid solution-treated Mg-3Nd-1Li-0.2Zn alloy were characterized usi......
...
...
A calcium stearate-based hydrophobic coating was formed on an anodized magnesium alloy by the electrodeposition method.T......
A large amount of directional and willow-like β\'phase was precipitated in Mg-10Gd-3Y-0.4Zr (GW103K) alloy after solu......
Solute Clusters/Enrichment at the Early Stage of Ageing in Mg-Zn-Gd Alloys Studied by Atom Probe Tom
Three-dimensional distribution of solute elements in an Mg-Zn--Gd alloy during ageing process is quantitatively characte......
A new kind of Mg-2Zn-0.6Ca (wt％) alloy was fabricated by casting and hot extrusion as a high-ductility structural materia......
A new Mg-2.2 wt％ Zn alloy containing 1.8 wt％ Ca and 0.5 wt％ Mn has been developed and subjected to extrusion under differen......
Effect of Alloyed Mo on Mechanical Properties, Biocorrosion and Cytocompatibility of As-Cast Mg-Zn-Y
The influences of Mo contents on mechanical properties,biocorrosion and cytocompatibility of as-cast Mg-6Zn-8.16Y-2.02Mn......
Magnesium (Mg) alloys have been extensively used in various fields,such as aerospace,automobile,electronics,and biomedic......
...
Effect of Phase Transformation During Long-Term Solution Treatment on Microstructure, Mechanical Pro
The influence of long-term solution treatment for various intervals on the microstructure, mechanical properties, and co......
Evolution of Microstructure, Residual Stress, and Tensile Properties of Mg-Zn-Y-La-Zr Magnesium Allo
The microstructure,texture,residual stress,and tensile properties of Mg-6Zn-2Y-1La-0.5Zr (wt％) magnesium alloy were inves......
Influence of Continuous Bending Process on Texture Evolution and Mechanical Properties of AZ31 Magne
Mg-3Al-1Zn alloy sheets have been deformed by continuous bending (CB) to investigate the effects of processing parameter......
Application of the Peierls-Nabarro Model to Symmetric Tilt Low-Angle Grain Boundary with Full〈a〉Disl
...
Threshold Chloride Concentration for Passivity Breakdown of Mg-Zn-Gd-Nd-Zr Alloy (EV31A) in Basic So
Mg-Zn-Gd-Nd-Zr alloy (EV31A) is a heat-treatable magnesium (Mg) cast alloy that can be used up to 200 ℃ for automobile ......
Effect of Solution Treatment on Microstructure and Corrosion Properties of Mg-4Gd-1Y-1Zn-0.5Ca-1Zr A
The as-cast multi-element Mg-4Gd-1Y-1Zn-0.5Ca-1Zr alloy with low rare earth additions was prepared,and the solution trea......
Effects of Welding Speed and Post-weld Hot Rolling on Microstructure and Mechanical Properties of Fr
The as-rolled AZ31 Mg alloy sheets are welded by friction stir welding (FSW) in this study,followed by annealing and hot......
Numerical simulation of temperature field of AZ91D magnesium alloy during equal channel angular extr
...
...
...
...
Effect of Heat-treatment on the Microstructures and Mechanical Properties of Mg-10Zn-5Al-0.1Sb-xCu M
...
...
Improvement of Bonding Strength of AZ31B Magnesium Alloy by Anodizing and Chromium-free Conversion T
...
...
Characterization and Properties of Duplex a-C:H/MAO Coatings on Magnesium Alloy using Combined Micro
The combined microarc oxidation (MAO) and magnetron sputtering deposition process was used to deposit duplex a-C:H/MAO a......
Effect of Post-weld Heat Treatment on Mechanical Characteristics of AZ31 Magnesium Alloy Welded Join
Tungsten inert gas (TIG) welding was performed on 2.7 mm thick commercial extruded AZ31B magnesium alloy plates. We inve......
...
...
Influence of Different Chelating Agents on Corrosion Performance of Microstructured Hydroxyapatite C
...
High Strength, Ductility and Superplasticity Mg-6Zn-1Y-0.6Ce-0.6Zr Alloy Prepared by Rapid Solidific
High strength,ductility,and superplasticity Mg-6.0％Zn-l.0％Y-0.6％Ce-0.6％Zr (wt％) alloy was prepared by sequentially applying r......
